Writing Mercurial Extensions

Mercurial features an extension mechanism for adding new commands.

Extensions allow the creation of new features and using them directly from the main hg command line as if they were built-in commands. The extensions have full access to the internal MercurialApi.

Use of Mercurial's internal API very likely makes your code subject to Mercurial's license. Before going any further, read the License page.

There are NO guarantees that third-party code calling into Mercurial's internals won't break from release to release. If you do use Mercurial's API for published third-party code, we expect you to test your code before each major Mercurial release (see TimeBasedReleasePlan). This will prevent various bug reports from your users when they upgrade their copy of Mercurial.

1. File Layout

Extensions are usually written as simple python modules. Larger ones are better split into multiple modules of a single package (see ConvertExtension). The package root module gives its name to the extension and implements the cmdtable and optional callbacks described below.

2. Command table

To write your own extension, your python module can provide an optional dict named cmdtable with entries describing each command. A command should be registered to the cmdtable by @command decorator.

Example using @command decorator (requires Mercurial 1.9):

   1 from mercurial import cmdutil
   2 from mercurial.i18n import _
   3 
   4 cmdtable = {}
   5 command = cmdutil.command(cmdtable)
   6 
   7 @command('print-parents',
   8     [('s', 'short', None, _('print short form')),
   9      ('l', 'long', None, _('print long form'))],
  10     _('[options] node'))
  11 def printparents(ui, repo, node, **opts):
  12     ...

2.1. The cmdtable dictionary

The cmdtable dictionary uses as key the new command names, and, as value, a tuple containing:

1. the function to be called when the command is used.
2. a list of options the command can take.
3. a command line synopsis for the command (the function docstring is used for the full help).

2.2. List of options

All the command flag options are documented in the mercurial/fancyopts.py sources.

The options list is a list of tuples containing:

1. the short option letter, or '' if no short option is available (for example, o for a -o option).

2. the long option name (for example, option for a --option option).

3. a default value for the option.
4. a help string for the option (it's possible to omit the "hg newcommand" part and only the options and parameter substring is needed).

2.3. Command function signatures

Functions that implement new commands always receive a ui and usually a repo parameter. Please see the MercurialApi for information on how to use these. The rest of parameters are taken from the command line items that don't start with a dash and are passed in the same order they were written. If no default value is given in the parameter list they are required.

If there is no repo to be associated with the command and consequently no repo passed, then norepo=True should be passed to the @command decorator.

   1 @command('mycommand', [], norepo=True)
   2 def mycommand(ui, **opts):
   3     ...

For examples of norepo, see the ConvertExtension (direct link to convert extension source).

3. Command function docstrings

The docstring of your function is used as the main help text, shown by hg help mycommand. The docstring should be formatted using a simple subset of reStructuredText markup. The supported constructs include:

Paragraphs:

This is a paragraph.

Paragraphs are separated
by blank lines.

A verbatim block is introduced with a double colon followed by an indented block. The double colon is turned into a single colon on display:

Some text::

  verbatim
    text
     !!

We have field lists:

:key1: value1
:key2: value2

Bullet lists:

- foo
- bar

Enumerated lists:

1. foo
2. bar

Inline markup: *bold*, ``monospace``. Mark Mercurial commands as :hg:`command` to make a nice link to the corresponding documentation. We'll expand the support if new constructs can be parsed without too much trouble.

4. Communicating with the user

Besides the ui methods listed in MercurialApi, like ui.write(*msg) or ui.prompt(msg, default="y"), an extension can add help text for each of its commands and the extension itself.

The module docstring will be used as help string when hg help extensionname is used and, similarly, the help string for a command and the docstring belonging to the function that's wrapped by the command will be shown when hg help command is invoked.

5. Setup Callbacks

Extensions are loaded in phases. All extensions are processed in a given phase before the next phase begins. In the first phase, all extension modules are loaded and registered with Mercurial. This means that you can find all enabled extensions with extensions.find in the following phases.

5.1. ui setup

Extensions can implement an optional callback named uisetup. uisetup is called when the extension is first loaded and receives a ui object:

def uisetup(ui):
    # ...

5.2. Extension setup

Extensions can implement an optional callback named extsetup. It is called after all the extension are loaded, and can be useful in case one extension optionally depends on another extension. Signature:

def extsetup():
    # ...

Mercurial version 8e6019b16a7d and later (that is post-1.3.1) will pass a ui argument to extsetup:

def extsetup(ui):
    # ...

5.3. Command table setup

After extsetup, the cmdtable is copied into the global command table in Mercurial.

5.4. Repository setup

Extensions can implement an optional callback named reposetup. It is called after the main Mercurial repository initialization, and can be used to setup any local state the extension might need.

As other command functions it receives an ui object and a repo object (no additional parameters for this, though):

def reposetup(ui, repo):
    #do initialization here.

It is important to take into account that the ui object that is received by the reposetup function is not the same as the one received by the uisetup and extsetup functions. This is particularly important when setting up hooks as described in the following section, since not all hooks use the same ui object and hence different hooks must be configured in different setup functions.

6. Configuring Hooks

Some extensions must use hooks to do their work. These required hooks can be configured manually by the user by modifying the [hook] section of their hgrc, but they can also be configured automatically by calling the ui.setconfig('hooks', ...) function in one of the setup functions described above.

The main difference between manually modifying the hooks section in the hgrc and using ui.setconfig() is that when using ui.setconfig() you have access to the actual hook function object, which you can pass directly to ui.setconfig(), while when you use the hooks section of the hgrc file you must refer to the hook function by using the "python:modulename.functioname" idiom (e.g. "python:hgext.notify.hook").

For example:

# Define hooks -- note that the actual function name it irrelevant.
def preupdatehook(ui, repo, **kwargs):
    ui.write("Pre-update hook triggered\n")

def updatehook(ui, repo, **kwargs):
    ui.write("Update hook triggered\n")

def uisetup(ui):
    # When pre-<cmd> and post-<cmd> hooks are configured by means of
    # the ui.setconfig() function, you must use the ui object passed
    # to uisetup or extsetup.
    ui.setconfig("hooks", "pre-update.myextension", preupdatehook)

def reposetup(ui, repo):
    # Repository-specific hooks can be configured here. These include
    # the update hook.
    ui.setconfig("hooks", "update.myextension", updatehook)

Note how different hooks may need to be configured in different setup functions. In the example you can see that the update hook must be configured in the reposetup function, while the pre-update hook must be configured on the uisetup or the extsetup functions.

7. Marking compatible versions

Every extension should use the testedwith variable to specify Mercurial releases it's known to be compatible with. This helps us and users diagnose where problems are coming from.

   1 testedwith = '2.0 2.0.1 2.1 2.1.1 2.1.2'

Do not use the internal marker in third-party extensions; we will immediately drop all bug reports mentioning your extension if we catch you doing this.

Similarly, an extension can use the buglink variable to specify how users should report issues with the extension. This link will be included in the error message if the extension produces errors.

   1 buglink = 'https://bitbucket.org/USER/REPO/issues'

8. Example extension

   1 """printparents
   2 
   3 Prints the parents of a given revision.
   4 """
   5 from mercurial import util
   6 
   7 # Every command must take ui and and repo as arguments.
   8 # opts is a dict where you can find other command line flags.
   9 #
  10 # Other parameters are taken in order from items on the command line that
  11 # don't start with a dash. If no default value is given in the parameter list,
  12 # they are required.
  13 #
  14 # For experimenting with Mercurial in the python interpreter:
  15 # Getting the repository of the current dir:
  16 #    >>> from mercurial import hg, ui
  17 #    >>> repo = hg.repository(ui.ui(), path = ".")
  18 
  19 
  20 def printparents(ui, repo, node, **opts):
  21     # The doc string below will show up in hg help.
  22     """Print parent information."""
  23     # repo can be indexed based on tags, an sha1, or a revision number.
  24     ctx = repo[node]
  25     parents = ctx.parents()
  26 
  27     try:
  28         if opts['short']:
  29             # The string representation of a context returns a smaller portion
  30             # of the sha1.
  31             ui.write('short %s %s\n' % (parents[0], parents[1]))
  32         elif opts['long']:
  33             # The hex representation of a context returns the full sha1.
  34             ui.write('long %s %s\n' % (parents[0].hex(), parents[1].hex()))
  35         else:
  36             ui.write('default %s %s\n' % (parents[0], parents[1]))
  37     except IndexError:
  38         # Raise an Abort exception if the node has only one parent.
  39         raise util.Abort('revision %s has only one parent' % node)
  40 
  41 
  42 cmdtable = {
  43     # cmd name        function call
  44     'print-parents': (printparents,
  45         # See mercurial/fancyopts.py for all of the command flag options.
  46         [('s', 'short', None, 'print short form'),
  47         ('l', 'long', None, 'print long form')],
  48         '[options] REV')
  49 }
  50 
  51 testedwith = '2.2'

If cmdtable or reposetup is not present, your extension will still work. This means that an extension can work "silently", without making new functionality directly visible through the command line interface.

9. Testing the example extension

This is a test for example extension above:

Test printparents extension.

Activate the printparents extension:
  $ echo "[extensions]" >> $HGRCPATH
  $ echo "printparents=" >> $HGRCPATH

Create a new repo:
  $ hg init r
  $ cd r

Add two new files and commit them separately:
  $ echo c1 > f1
  $ hg commit -Am 0
  adding f1
  $ echo c2 > f2
  $ hg commit -Am 1
  adding f2

Update to revision 0. Add and commit a third file creating a new head:
  $ hg up 0
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ echo c3 > f3
  $ hg commit -Am 2
  adding f3
  created new head

Merge the two heads and commit:
  $ hg merge
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg commit -m 3

Test printparents with the (merged) tip:
  $ hg print-parents tip
  default 33960aadc16f c3adabd1a5f4

Testing printparents with revision 2 will fail (because there is only one parent):
  $ hg print-parents 2
  abort: revision 2 has only one parent
  [255]

Learn more about testing Mercurial: WritingTests

10. Wrap up: what belongs where?

You will find here a list of most common tasks, based on setups from the extensions included in Mercurial core.

10.1. uisetup

• Changes to ui.__class__ . The ui object that will be used to run the command has not yet been created. Changes made here will affect ui objects created after this, and in particular the ui that will be passed to runcommand

• Command wraps (extensions.wrapcommand)

• Changes that need to be visible by other extensions: because initialization occurs in phases (all extensions run uisetup, then all run extsetup), a change made here will be visible by other extensions during extsetup

• Monkeypatches or function wraps (extensions.wrapfunction) of dispatch module members

• Setup of pre-* and post-* hooks

• pushkey setup

10.2. extsetup

• Changes depending on the status of other extensions. (if extensions.find('mq'))

• Add a global option to all commands
• Extend revsets

10.3. reposetup

• All hooks but pre-* and post-*
• Modify configuration variables

• Changes to repo.__class__, repo.dirstate.__class__

11. Publishing your extension

If you think your extension is general purpose, high quality, and of interest to more than just you, see PublishingExtensions.

CategoryHowTo CategoryDeveloper

日本語