#pragma section-numbers 2 ## page was renamed from subrepos = Subrepository = This is considered a [[FeaturesOfLastResort|feature of last resort]]. Automatic management of nested [[Repository|repositories]] from other sources. See also Mercurial's built-in [[Topic:subrepos|help on subrepos]]. <> == Introduction == Subrepositories is a feature that allows you to treat a collection of repositories as a group. This will allow you to clone, commit to, push, and pull projects and their associated libraries as a group. This feature was introduced in a preliminary form in Mercurial 1.3 and has been improved steadily since then. There are still some commands that lack proper support for sub-repositories, but we will fix them as we come across them and as we figure out how to best make them subrepo-aware. For those used to Subversion, this concept is closest to what you can achieve with Subversion directories marked with the `svn:externals` property. Mercurial 1.5 has support for using Subversion repositories as subrepos. Mercurial 1.8 also has support for Git. == Basic usage == === Start === To start using subrepositories, you need two repositories, a main repo and a nested repo: {{{ $ hg init main $ cd main $ hg init nested }}} Next we'll mark the directory 'nested' as a Mercurial subrepository by creating an entry for it in the special '`.hgsub`' file. {{{ $ echo nested = nested > .hgsub $ hg add .hgsub }}} On the left hand side of the assignment is the path in our working dir, and the right hand side specifies the source to pull from. This functionality is cross-platform so Windows users have to use '`/`' as the path separator for local directories. The source path of a Mercurial repository can either be a relative or absolute path or URL. It is generally recommended to use trivial relative paths where the source path is the same as the working dir path: This will ensure that the subrepositories always can be found 'in place'. Other relative paths can be used if the subrepositories can't be hosted 'in place', for example because of limitations of a central repository or hosting service. A consequence of using such non-trivial relative paths is that clones can't be cloned. URLs and absolute paths can be useful if the subrepository is hosted centrally without utilizing any DVCS workflows and thus never should be re-cloned. URLs can also be used for external resources, but note that it in that case might be a better idea to use a local distributed mirror and use a trivial relative path instead. ==== Nested repository subpaths ==== Note that subpaths can be used to redefine source paths locally. Here we're going to define that the Mercurial subrepository '`nested`' pulls from '`nested/repo/path`' using a path relative to main. This says 'anyone who can find our main repo can find the nested repo just by tacking nested onto that path'. Note that the nested repository must actually exist for the line in `.hgsub` to do anything. For instance, if rather than creating a local nested repository you attempt to link to a pre-existing remote one, you must ALSO clone that repository: {{{ $ echo nested = nested/repo/path > .hgsub $ hg add .hgsub $ hg clone https://example.com/nested/repo/path nested }}} If you intend to track something other than the current revision of the default branch this is also the time when you would update the subrepo to the desired revision. Now let's add some files to nested, and add them. {{{ $ echo test > nested/foo $ hg -R nested add nested/foo $ hg -R nested commit --message "Initial commit." }}} ==== Non-Mercurial Subrepositories ==== As of version 1.5, Mercurial can also support other repository types for your subrepo. The type of the subrepository can be specified in square brackets before the source. The default is '[hg]'. ===== SVN subrepositories ===== If you want a subrepo that referred to a Subversion repository, you would do something like this: {{{ $ echo "nested = [svn]https://example.com/nested/trunk/path" >.hgsub $ hg add .hgsub $ svn co https://example.com/nested/trunk/path nested }}} ===== Git subrepositories ===== As of version 1.8, Mercurial supports Git subrepositories: {{{ $ echo "nested = [git]git://example.com/nested/repo/path.git" > .hgsub $ hg add .hgsub $ git clone git://example.com/nested/repo/path.git nested }}} === Committing === When we commit, Mercurial will attempt to create a consistent snapshot of the state of the entire project and its subrepos. It does this by recording the state of all subrepos. As of version 2.0, commits are aborted when there are uncommitted changes in subrepos. {{{ $ hg ci -mtest committing subrepository nested }}} Subrepo states are stored in a '`.hgsubstate`' file that is managed automatically by Mercurial. Do not manually edit this file! === Update === Whenever Mercurial encounters a changeset containing subrepos, it will attempt to pull the specified subrepos and update them to the appropriate state: {{{ $ cd .. $ hg clone main main2 updating working directory pulling subrepo nested requesting all changes adding changesets adding manifests adding file changes added 1 changesets with 1 changes to 1 files 2 files updated, 0 files merged, 0 files removed, 0 files unresolved $ cat main2/nested/foo test }}} Subrepos may also contain their own subrepos and Mercurial will recurse as necessary. To do an explicit update from a repository that is not the default one specify the repository's source with `--config paths.default=`. === Push === Mercurial will automatically attempt to first push all subrepos of the current repository when you push. This will ensure new changesets in subrepos are available when referenced by top-level repositories. === Pull === Notably, the '`pull`' command is by default ''not'' recursive. This is because Mercurial won't know which subrepos are required until an update to a specific changeset is requested. The update will pull the requested subrepositories and changesets on demand. To get pull and update in one step, use '`pull --update`'. Note that this matches exactly how '`pull`' works without subrepositories, considering that subrepositories lives in the working directory: * '`hg pull`' gives you the upstream changesets but doesn't affect your working directory. * '`hg update`' updates the contents of your working directory (both in the top repo and in all subrepos) It might be a good idea to always pull with `--update` if you have any subrepositories. That will generally ensure that updates not will miss any changesets and that update thus not will cause any pulls. If the pull with update fails due to crossing branches then '`hg update`' must be used to get all the subrepository updates. === Synchronizing in subrepositories === Subrepos don't automatically track the latest changeset of their sources. Instead, they are updated to the changeset that corresponds with the changeset checked out in the top-level changeset. This is so developers always get a ''consistent set'' of compatible code and libraries when they update. Thus, updating subrepos is a manual process. Simply run '`hg pull`' and '`hg up`' in the target subrepo, test in the top-level repo, then commit in the top-level repo to record the new combination. The [[OnsubExtension|onsub]] extension can be used to automate that. === Delete === To remove a subrepo from the parent repo, you must delete the subrepo definition from the '`.hgsub`' file at the top level of the parent repo. Once you do this, the subrepo tree will show up as a set of unknown files when you run `hg status`, and you can delete the files. == Recommendations == === Use a thin shell repository to manage your subrepositories === The most obvious way to construct a project using subrepositories is: {{{ project/ # your main project repository somelib/ # your shared library as a nested subrepository }}} This tends to be suboptimal for a variety of reasons: * overly-strict tracking of relationship between project/ and somelib/ * impossible to check or push project/ if somelib/ source repo becomes unavailable * lack of well-defined support for recursive diff, log, and status * recursive nature of commit surprising The recommended structure is of this form: {{{ build/ # thin master repo to manage build environment project/ # your main project as a subrepo somelib/ # your shared library as a sibling subrepo }}} Here, all repositories containing 'real' code have no subrepositories of their own (ie they are leaf nodes). They can thus be treated as completely ordinary repositories and a developer can largely ignore the additional complexities of subrepositories. Work can continue in these repositories even if their siblings become unavailable. Recursive commits in build/ are only needed to synchronize changes between siblings and to tag releases. === Use 'trivial' subrepo paths where possible === Mercurial accepts both complex and absolute subrepo paths but these may cause a variety of issues: * Absolute URLs are subject to change and may make old versions of the project difficult to reconstruct * Relative paths of the form "foo = ../foo" will not generally allow clones to be cloned * Paths containing drive letters, UNC paths, backslashes, or other Windows-isms will generally not be portable The most reliable scheme to have all subrepos paths be of the form: {{{ project = project somelib = somelib }}} where the source and target are both the same simple directory name. {i} On hgweb servers, it will be useful to use symlinks or duplicate path entries to allow shared libraries to appear in multiple places. {i} One [[http://mercurial.markmail.org/thread/sjqfwk2orrjditc4|workaround]] with Mercurial 2.0 is to use `[subpaths]` in `.hgsub` to map "ideal" paths to the flat namespace used by some hosting providers. For example, a project hosted at `https://bitbucket.org/kiilerix/subrepodemo/` could have a `.hgsub` like this: {{{ sub = sub [subpaths] https://bitbucket\.org/kiilerix/subrepodemo/sub = https://bitbucket.org/kiilerix/subrepodemo-sub }}} Similar subpaths magic can be used for pushing to Github with hg-git: {{{ ^git\+https://github\.com/([^/]*)/([^/]*)/([^/]*)$ = git+https://github.com/\1/\3.git }}} == Caveats == As this feature solves a complex problem and is quite young, there are a number of rough edges: * Some commands require a `-S` or `--subrepos` switch to operate on subrepos (available [[WhatsNew#A1.7_.282010-11-01.29|since Mercurial 1.7]]) * Many commands are not aware of subrepos * Update/merge currently can't remove subrepositories entirely as that might lose local-only changes * There's no support for merging across renaming/moving subrepos * Collisions between normal files and subrepos are not handled * Subrepository pulls are always delayed until needed by an update * `pull -r` will not filter revisions pulled in subrepositories * Push similarly ignores URLs and revision filters * Commit doesn't propagate some flags like `-A` to subrepos * Update of parent repo will pull no subrepo changesets (if null revision is indicated) or all changesets (if any other revision is indicated). This [[Bts:issue3489|behavior is by design]]. === Inherited hooks === {{{#!wiki note '''Note''' This issue has been resolved [[WhatsNew#Mercurial_2.4_.282012-11-1.29|since Mercurial 2.4]] }}} For those operations that imply a subrepository recurson (`update`, `push`, `commit`, etc.), container repository's configuration is inherited and merged with the subrepository's `.hg/hgrc`. In particular, the `[hooks]` section is inherited when operating on a particular subrepo. Therefore, if you have hooks configured on the outer repository, they will be executed also for each subrepository. This situation can lead to trouble if your hook scripts are versioned in the same repository. For instance, you may want to use `preupdate` and `update` hooks to implement a deploy mechanism based on Mercurial. A possible configuration for the production repository could be the following: {{{ [hooks] preupdate = ./scripts/deploy.sh prepare update = ./scripts/deploy.sh finalize }}} If you have subrepositories, and a particular update needs to proceed recursively on any of them, the `preupdate` hook will try to execute `./scripts/deploy.sh`. As it is very unlikely to find such path relative to the subrepository root, the hook will fail preventing the update operation to happen. This particular issue is difficult to solve, because some other configuration options should be inherited (see Bts:issue2904). The solution for this is to define empty hooks at each subrepository configuration, like the following: {{{ [hooks] preupdate = update = }}} This way, the inherited configuration is overriden. == Tips & tricks == === How to find out what changeset of main repository contains specified changeset of subrepository === Assume you know hash of needed subrepository's changeset: "hash1234blablabla", go to main repository's directory and type: {{{ $ hg grep hash1234blablabla .hgsubstate }}} == Alternatives == If you're looking for package management rather than precise version control, here are some possible alternatives: * Python * [[https://bitbucket.org/selinc/guestrepo|Guest Repo Extension]] * [[http://pypi.python.org/pypi|PyPI]] and [[http://www.pip-installer.org/en/latest/index.html|pip]] ([[http://article.gmane.org/gmane.comp.version-control.mercurial.general/31303|Example]]) * [[https://bitbucket.org/hstuart/repoman|repoman]]: Mercurial-based repository forest manager * Non-Mercurial: [[http://en.wikipedia.org/wiki/Repo_(script)|Repo tool by Google:]] used by the Android project, written in Python, specific to Git * PHP * [[http://getcomposer.org/|Composer]] * Java * [[http://maven.apache.org/|Maven]], [[http://ant.apache.org/ivy/|Ivy]], [[http://www.jfrog.com|Artifactory]], etc (package sub-project or dependency as a .jar file) * .NET * [[http://nuget.codeplex.com|NuGet]], sponsored by Microsoft, can host custom feeds for internal packages * All * Shell script (or .bat file) at root of repository that contains a series of 'hg clone' calls to get each module. Another script calls 'hg incoming' for each of them to check for updates. * Mercurial extension as alternate to shell script / `.bat` file. (A Mercurial extension comes pretty close to being an "hg script file". Written in Python, it will run easily anywhere that Mercurial runs, without any need to install another interpreter.) The extension could include a post-update hook to check for new upstream changes, and a pre-commit hook for local modifications. == See Also == * [[http://mercurial.aragost.com/kick-start/en/subrepositories/|Example-driven subrepository guide]] == How it Works == To help explain how this works, think of the top level repository as something that is completely dumb except for two tasks: * `.hgsub` stores a path to a subrepository * `.hgsubstate` stores a hash of each current subrepository commit The top level repository "knows" nothing else. All other tasks are accomplished with scripts that look up the path and hash, then go to that specified location/version to look up additional information from the subrepository. That is why branches are separate between top level and subrepository. The top level has this simple `.hgsub` file storing paths, and a `.hgsubstate` file storing hashes. The top level repository just sees those files the same as any other file in a repository, and you can branch that file like any other file, thus storing different subrepository commit hashes in different top level branches. Independently, each subrepository contains the full source history and branches of that repository. No subrepository knows anything about the top level, it exists in its own little world. Any features, tools, or behaviors arise from scripts that perform automated lookups between the parent and subrepository for your convenience. There are not any smarts built into the repositories themselves. Essentially, you can assume in all cases that neither the parent nor sub repositories know anything about each other. Instead, there are just simple scripts that look up strings in the `.hgsub` and `.hgsubstate` files and pretend that it ties the repositories together, performing automated clones, pulls, and updates for you. This makes it easy to track exact versions of multiple repositories and keep them consistent with each other so that the right version of the parent repository and each subrepository is checked out. ---- Other Languages: [[Frenchsubrepos|Français]], [[ChineseSubrepository|中文]]